The #1 Thermal Disinfecting in Waukesha, WI with Over 400 5-Star Reviews!

What to Look for in a Thermal Disinfecting Company & Methods

• Physical Wipe Down
  This method is the least effective, most time consuming and the most expensive. Using this type of procedure will inevitably leave untreated surfaces. However, if all areas of a business must remain open, this may be your best option particularly if you have available employees to perform this task.

• Surface Spray
  Using a sprayer can be useful, and can certainly get the job of disinfecting accomplished, but only in limited areas. Since a large volume of liquid is used with large droplets, typically a lot of time will spent removing the excess and drying the liquid. But again, this can only be used in very limited areas.

• ULV Foggers
  ULV foggers (ultra low volume) have a droplet size of 20 microns and is most practical and effective when used in locker rooms and other facilities where there are no sensitive electronics or paper goods that could be adversely affected. This method leaves a visible layer of moisture which typically dries in 10 minutes to an hour. In these low risk environments where there is Staph bacteria, an active fungus (athletes foot), etc., this is usually the most effective method.

• Thermal Foggers
  Thermal foggers have a small (5 micron) droplet size which have the ability to penetrate cracks and crevices. This type of treatment uses an inert carrier (which evaporates) leaving behind the active ingredient for disinfection and sanitization. With a high quality and well-designed machine the fog appears to be dry. Using this method computers, printers, monitors, keyboards, paper goods and even HVAC systems can be safely and effectively disinfected. With the correct carrier fluid, and an appropriate chemical designed for use.